| Magnetek
Rectifiers
Magnetek Millennium Rectifier 170W
Magnetek's 170 W Rectifier is designed for small power systems for Telecom, Industrial and IT applications. The rectifier can be used in N+1 multiple shelf configuration as well as a stand-alone shelf.
Front plated LED's allow easy visualization of unit status.
Magnetek Millennium Rectifier 200W
Designed for telecom, industrial and IT small-sized power applications, Magnetek's 350 W Rectifiers convert commercial 85-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output.
The unit achieves electrical efficiencies of 87%. The unit is designed to be used in N + 1 multiple shelf configuration as well as a stand-alone shelf. The 200 W Rectifiers are hot swappable. Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple.
Designed to interface with digital control unit. Front LED allows easy visualization of unit status. UL, CSA and IEC certified.
Magnetek Millennium Rectifier 350W
Designed for telecom, industrial and IT small-sized power applications, Magnetek's 350 W Rectifiers convert commercial 85-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficiencies up to 90%.
The unit is designed to be used in N + 1 multiple shelf configuration as well as a stand-alone shelf. The 350 W Rectifiers are hot swappable.
Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple. Designed to interface with digital control unit.
Front LED allows easy visualization of unit status. UL, CSA and IEC certified. Fits Magnetek 1500W energy system SY4-J06
Magnetek Millennium Rectifier 750W
Designed for telecom, industrial and IT small-sized power applications, Magnetek's 750 W Rectifiers convert commercial 90-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficiencies of 91% at 230 Volt Ac.
The unit is designed to be used in N + 1 multiple shelf configuration as well as a stand-alone unit.
The 750 W Rectifiers are hot swappable into Magnetek's standard 19” or 23” subracks for easy upgrading of your rectifiers—even while the system is online—without interrupting the load.
Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple.
Designed to interface with control unit either analogically or digitally.
Front LED's allow easy visualization of unit status.
UL, CSA and IEC certified.
Magnetek Millennium Rectifier 1500W
Designed for superior performance in telecom, datacom, industrial and IT applications, Magnetek's 1500 W Rectifiers convert commercial 85-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficiencies up to 91% with a power density of 5 W/in3.
The unit is designed to work in N + 1 redundant configurations. The 1500W Rectifiers are hot swappable into Magnetek's standard 19” or 23” subracks for easy upgrading of your rectifiers—even while the system is online—without interrupting the load.
Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple. Up to five units will fit in a single shelf, mountable in 23” rack. Four units in a 19" subrack
Unit has alarm LED's on the front panel to visualize working conditions. It interfaces via RS 485 to Magnetek's power system controllers, or RS 485 capable remote devices.
Magnetek Millennium Rectifier 3kW 3U Compact
Designed for superior performance in telecom, datacom, industrial and IT applications, Magnetek's 3000 W 3U Compact Rectifiers achieve a very high efficiency (92%) as a result of a remarkably efficient special phase shift topology. Measuring just 5.13”W x 5.21”H x 12.5”D this unit has a power density in excess of 9 W/in3.
The unit is designed to work in N + 1 redundant configurations. The 3000 W 3U Compact Rectifiers are hot swappable into Magnetek's standard 19” or 23” subracks for easy upgrading of your rectifiers—even while the system is online—without interrupting the load. Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple 3 units across 19” or 4 units across 21”.
The unit has alarm LED's and test points on the front panel to visualize working conditions.
It interfaces via serial link to Magnetek's power system controllers as well as to other RS 485 controllers, or can be easily interfaced analogically.
Magnetek Millennium Rectifier 3kW 3U CR Compact
Designed for superior performance in telecom, datacom, industrial and IT applications, Where reliability and cost effectiveness are second to none. Magnetek's 3000 W 3U Compact Rectifiers achieve a very high efficiency (92%) as a result of a remarkably efficient special phase shift topology.
Measuring just 5.13”W x 5.21”H x 12.5”D this unit has a power density in excess of 9 W/in3.
The unit is designed to work in N + 1 redundant configurations. The 3000 W 3U Compact Rectifiers are hot swappable into Magnetek's standard 19” or 23” subracks for easy upgrading of your rectifiers—even while the system is online—without interrupting the load. Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple 3 units across 19" or 4 units across 23".
The unit has alarm LED's on the front panel to visualize working conditions.
It interfaces via serial link to Magnetek's power system controllers, or other RS 485 capable control unit available on the market.
Magnetek Magnum Rectifier 12kW Low THD
Designed for superior performance in telecom, industrial and IT applications, Magnetek's 12000 W Rectifiers Low THD are fully electronic three-phase switch mode power supply modules.
The compact size makes it one of the most compact 200 Amps forced cooled rectifiers in service.
Measuring just 19”W x 5.2”H x 19.09”D this unit has a power density in excess of 7 W/in3.
Magnetek 12000 W Rectifiers Low THD combine a digitally controlled active Power Factor
Correction circuit with an innovative electronic design to achieve electrical efficiencies in excess of 90% and THD below 5%. The high efficiency and reliability of this unit ensures maximum system uptime for critical applications up to 12,000 Amps, to minimize cost and reduce installation time.
The smart user interface makes remote or local programming and monitoring of all major rectifier parameters easy.
Remote computer communications is possible through an RS-485 serial connection interface (SCI).
Modules are UL listed, CSA, CE, IEC and Broadcast NEBS Level 3 certified.
Magnetek Magnum Rectifier 12kW
Designed for telecom, industrial and IT applications, Magnetek's 12000 W Rectifiers are fully electronic three-phase switch mode power supply modules.
Measuring just 19”W x 5.21”H x 17.4”D this unit has a power density in excess of 7 W/in3.
The unit achieves electrical efficiencies in excess of 90%.
The smart user interface makes remote or local programming and monitoring of all major rectifier parameters easy. Indicators, alarms and protection devices are standard with every unit including three level overvoltage protection, undervoltage and overtemperature protection, and rectifier fail alarm.
Magnetek Magnum Rectifier 3KW Enhanced
Designed for superior performance in telecom, datacom, industrial and IT applications where small size and low weight is a requirement, Magnetek's 3000 W Enhanced Rectifiers convert commercial 176-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficiencies of 92% at 48 V 50 A with a power density of 5.5 W/in3.
The unit is designed to work in N + 1 redundant configurations. The 3000 W Enhanced Rectifiers are hot swappable into Magnetek's standard 19” or 23” subracks for easy upgrading of your rectifiers—even while the system is online—without interrupting the load. Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple. Up to five units will fit in a single shelf, mountable in 23” rack.
Remote communication to Magnetek's power system controllers is possible through an RS-485 serial connection interface (SCI). The built-in keypad and LCD makes local programming easy.
Modules are UL listed and NEBS Level 3 certified and meet Bellcore standard TR-TSY000947. |
